athletic corset

C1890-1900 THE ATHLETIC CORSET: PART 2

NOTE  *This article was originally published January 2017 for Foundations Revealed. The link can be found here.

In part 1 I worked with a pattern developed from ‘The Athletic Corset’ as featured in ‘A practical guide to corset cutting and making’ by William D.F. Vincent.

Now I’ll go on to create my own corset.

Given both its likely date and its function-over-fashion design, this corset could have been constructed using a single layer of coutil, keeping it lightweight but durable for wear during sporting activities. For this reason I chose a black broche (a heavyweight coutil with a subtle dot pattern) and a strong powernet (in place of the elastic webbing)

The Athletic Corset pattern

1

The corset was cut as follows:

  • 2 layers of broche to sandwich the busk: CUT 2 PAIRS CENTRE FRONT
  • 2 layers of broche for centre back eyelet panel: CUT 2 PAIRS CENTRE BACK
  • Single layer of broche for the rest of the plain pieces: CUT 1 PAIR FRONT, SIDE BACK, BACK
  • Single layer of powernet used in place of the woven elastic panels: CUT 1 PAIR SIDE FRONT

 

Preparing the Boning Channels

I decided to sew the corset seams wrong sides together, using external bone casings to cover the seam allowances. The pattern also indicated the placement of additional exterior channels, most of them down the centres of the panels.

I began with 27mm wide strips of broche, cut parallel to the selvedge, and used a 12mm bias tape maker to create  single bone casings for the channels covering the seams.

For the other channels I wanted double bone casings, so I cut those channels 52mm wide and used a 25mm tape maker for those. When applying them, I stitched close to the edge either side, and then added the dividing line of stitching down the centre to create the twin channel.

2

Inserting the busk

The pattern used a simple flat steel busk. The two CENTRE FRONT pieces were placed right sides together and stitched in order to insert the busk in the usual way.

 

Preparing the FRONT panel

Following the marking on the pattern, the shaped dart in the FRONT panel was stitched closed before joining to either the centre front or side front pieces.

 

6

 

A double bone channel was also needed on this panel. This will be the only one applied before the main construction, since it seems to disappear into the FRONT/CENTRE FRONT seam.

frontpanelpatternbone

The angled placing made positioning tricky as I tried to make the sides symmetrical. I was concerned about whether making the channel end in the seam would create awkward bulk, and whether I would be able to stitch down another channel to overlap the seam.

8

Assembling the front section

I stitched the FRONT/CENTRE FRONT seams wrong sides together, and then the FRONT/SIDE FRONT seams in the same way. This was the seam where the broche met the powernet, so I used a secure stitch on either end of the seam to control the powernet whilst stitching, and stop it from slipping.

9

CENTER BACK panel: Boning channels

I created the centre back edge by stitching CENTER BACK broche sections right sides together, then turning to the right side and pressing. I used the side of my sewing machine foot as a guide to create three equal channels for the eyelets and flat steels.

10

Assembling the back section

I stitched the BACK/CENTRE BACK seams wrong sides together, and then the BACK/SIDE BACK seams in the same way.

11

Joining front and back sections and applying bone casings

The front and back sections were joined wrong sides together. Again, secure stitches were used on each end to help control the powernet.

 

Applying the bone casings

I trimmed the seam allowances and pressed them down. (I turned the seam allowances in the powernet back onto the broche reasoning that stitching the boning casings onto the power net might cause the seam to crack under pressure). Then I applied the single bone casings over them, on the outside of the corset.

Then I applied the wider double bone channels to the centre front panel and side back panel. I should have used a double channel for the back according to hte pattern, but I found that the panel wasn’t wide enough, so a single casing had to make do instead.

141516

Boning

I used spiral steel boning throughout most of the corset, with flat steels either side of the eyelet channel in the centre back.

Binding

I wanted to use the broche for binding, but found that it would cause difficulty when sewing, especially at the ends. Instead I chose a satin finish pre-folded bias binding. I first machine stitched it to the right side and then flipped it over and top stitched in place.

1718

Eyelets

Finally I inserted twelve pairs of eyelets, as marked on the pattern.

19

The Finished Corset

I was pleased with the finished corset. I love the textural contrast of the mesh to the broche fabric. My choice of a sheer mesh allows the undergarment or skin to show through, adding interest to an otherwise fairly plain design.

Having worn and tested the corset with lots of bending and stretching, I felt that it was supportive, yet the stretch mesh panel provided me with some freedom of movement. The corset could be laced closed, reducing the waist but not being too restrictive.

20a21222324

I was pleased with the cut of the corset around the cup shape and under the arm. It was cut low, allowing full movement of the arm, yet still had good coverage of the breasts. The pattern could easily be adapted for use as a fashion corset.

25262728

The corset is cut short at the back, allowing the wearer to bend and sit comfortably.

I liked the idea of the double bone casing, providing both additional support and an eye-catching feature.  A contrast colour could be used to make them stand out.

I would probably remove the dart from the pattern for future use, and instead take the fullness out of the front panels from the sides. It could be tapered a little more at the centre front/front seam, bringing the corset closer to the body.

Vincent’s Athletic Corset does perform as advertised. It’s a comfortable, everyday corset, providing control and shape for the wearer whilst allowing considerable freedom of movement.

 

This sample is available to buy from my ETSY store.

Advertisements
The Athletic Corset pattern

C1890-1900 THE ATHLETIC CORSET: PART 1

NOTE  *This article was originally published January 2017 for Foundations Revealed. The link can be found here.

This is the first part in a two part series discussing ‘The Athletic Corset’ pattern as featured in ‘A practical guide to corset cutting and making’ compiled by William D.F. Vincent. (More about this book here.) This article will discuss the pattern and how I have interpreted it whereas the second will focus on recreating the corset and my methods used in its construction.

As someone active  in various sports I was intrigued by the corset and its fit considering its purpose. Perhaps I could test it out to see how viable it is to wear as a functioning garment whilst playing sports?

I haven’t used elastic/ stretch fabrics before in ‘true’ corsetry (excluding contemporary  lingerie/basque making) so it would be interesting to see if there were any benefits to the fabric properties, and whether this would enhance freedom of movement during sporting activities.

The Pattern and Observations

The Athletic Corset pattern

  • The pattern was constructed in 12 pieces, 6 panels per side. I will rename as follows for the remainder of the article: Working right to left, Centre Front, Front, Side Front, Side Back, Back, Centre Back.
  • Centre Front – features a 2 part opening straight busk. According to the measurements on the scaled pattern the centre front should measure roughly 10.5 inches (27cm). A double bone is positioned in the centre of the piece. (A wide single casing is used, but stitched to create two channels.)
  • Front – Double bone running into the CF/F seam. Small shaped dart extending from the hem for additional shaping to the front panel.
  • Side Front (Elastic Webbing) – runs the length of the garment. Used to promote ‘freedom of movement’.
  • Side Back – wide panel with a double bone positioned in the centre of the panel. Quite a lot of shaping shown for the hip.
  • Back – features a double bone positioned in the centre of the panel. No indication of being on the inside or the outside of the garment.
  • Centre Back – Has twelve pairs of eyelets at the back for lacing, with a bone on ether side.

Looking at the pattern, it can be noted that there is only a small reduction to the waist area overall, presumably to allow the wearer some freedom of movement during wear. Although there is shaping over the bust and hip area, the seams are relatively flat in comparison to other corset styles that would create a fashionable, narrow-waisted silhouette when worn. Even with the additional bone channels, the garment is only lightly structured considering the small number of panels on each side. There is no indication of the construction methods used, but I am going to assume that bone channels were created in the seams joining the panels for extra bones.  Whilst making the corset I will decide whether the additional bone channels were placed internally or applied to the exterior of the corset.

Having only the diagram of the pattern to refer to, I knew little else about the corset, particularly the date. The book in which it appears could have been compiled as late as the 1920’s, and features styles typical of times significantly before its publication. Although I could guess, I preferred to do some further research into sports corsetry, looking at advertisements and publications to try to anchor this style to a rough date.

 

History

The reinvention of the ancient Olympic games in Athens in 1896 had a huge affect on how society viewed physical activity and the impact it had on dress and fashion. Sports provided an opportunity for the sexes to interact, and generated the beginnings of competitiveness amongst men and women. “Women were now participating in various games, tennis, cycling, skiing skating and soon began to eliminate pieces of their clothing that for daytime wear made their daily lives more efficient” (Doyle). Whilst corsets were still an integral part of women’s dress, they were being manufactured with a lighter, less structured mindset and with less coverage of the body to promote freedom of movement for sporting activities. For the first time, fashion books and magazines promoted diet, exercise and proper foundations. Corset companies advertised the sports corset and its benefits to the weathy lady of leisure.

Corsets were adapted, many featuring bust sections that were cut low under the arm, allowing the wearer full ease of movement over the upper body. Riding styles were cut high on the hip to provide comfort when in the saddle. Invented in 1820, elastic panels (trademarked ‘Lastex’ in 1931 for strips of rubber covered with silk, cotton, wool or rayon to form a yarn) wasn’t favoured in corsetry until the 1890s, when it was introduced into the popular new riding and sports corsets styles.

As women entered the work force during the First World War, factories and workplaces imposed strict regulations governing dress while working. The traditional rigid boned corset was slowly disappearing in favour of lighter support and freedom of movement. Most women from the 1920’s still wore some kind of corset, corselette or girdle (Steele), often utilising the elastic panel webbing for support and control.

 

Ferris Bros. Corsets, New York

Sherwood B Ferris and his brother Murray Whiting Ferris established the Ferris Bros. Company in 1878. Known best as the manufacturers behind the ‘Ferris Good Sense corset’, theirs were considered healthier than the traditional corset for girls and young women who were not cinching the waistline too tightly.

The Good Sense range also advertised bicycle and athletic corsets for the eager sporting woman. These corsets supposedly gave the body ‘healthful and graceful full support’. Advertisements published by Ferris Bros. give us a really clear insight into the corsets’ intended purpose, being especially designed for women who enjoy healthful exercise.  ‘An indispensable garment for the woman who rides a wheel, plays golf or tennis, rows a boat or climbs a mountain’. From looking at these advertisements I decided to date the corset pattern somewhere between the latter part of the 1890’s and the early 1900’s. Although I looked at many, these two seem to reflect our pattern the most closely.

Ferris Athletic corset waist advert

 

“Ferris Athletic Corset Waist is especially designed for women who enjoy outdoor sports. Faultless in outline, it meets every requirement of fashionable dress and yet there is neither restraint nor pressure. Elastic bands at the sides yield to every breath and movement; comfortable shoulder straps support the bust in any position and keep the shoulders from drooping.

FERRIS ATHLETIC WAIST is the most healthful, restful, graceful, garment a woman ever wore.”

Ferris Bros corset advert 1903-good sense athletic waist Ferris

“The Outline of Health – There is an old fashioned notion that an athletic waist is ugly. This perhaps is the reason so many woman still embrace the torture of health destroying corsets. They do not know the principles of the FERRIS GOOD SENSE ATHLETIC WAIST.

The above illustration is a photographic reproduction. Note the lines of beauty. See the elastic expansion on the side that allows the waist to breathe when you do, that permits you to turn and bend and swing with perfect ease and grace.”

 

Pattern Planning Stages

My initial approach to the corset draft was to scale up the pattern to life size and use it as a block, amending as necessary to my own measurements. Looking at the centre back depth from my printout, I used my home printer to scale the pattern up by 170% as a rough starting point. Ten minutes and some cutting and sticking later, I had my basic block to work from.

4

Measurements

  • Overbust: 76cm
  • Underbust: 67cm
  • Waist: 62cm
  • Top hip: 71cm
  • Full hip: 84 cm
  • Over bust to underbust: 5.5cm
  • Overbust to waist: 14cm
  • Point of bust (POB to POB) 19cm
  • Waist to top hip: 10cm
  • Waist to full hip: 20cm

I then made a table to work out my corseted measurements. I decided to work with with a 3″ reduction throughout the corset pattern. (2″ for the lacing gap and the then a further 1″ to provide minimal cinching to the waist. Referring to the corset pattern sketch showed quite minimal shaping.

 

Natural Reduction Corseted
Bust 76cm 7.5cm 68.5cm
Underbust 67cm 7.5cm 59.5cm
Waist 62cm 7.5cm 54.5cm
Top Hip 71cm 7.5cm 63.5cm
Full Hip 84cm 7.5cm 76.5cm

 

I would now work with the block as a net pattern (no seam allowances.) Comparing my measurements to the block’s overbust to waist depth measurements, I found that I wouldn’t need to reduce or lengthen the corset in this area. I made a table to compare my own measurements to those of the block to see the differences and identify where the pattern would be amended.

 

Block 1/2 my desired measurements
Difference
Bust 44cm 34.25cm -9.75cm
Underbust 37.9cm 29.75cm -8.15cm
Waist 30.9cm 27.1cm -3.80cm
Top Hip 40.75cm 31.75cm -9cm
Full Hip N/A N/A N/A

 

  • I would take a lot from the bust and hip measurements in comparison to the waist.
  • I would take more from the front overbust area than the back, reducing the bust capacity, as I have a a petite frame and this area will gape.
  • I would take out though the side back panel as this was the widest panel for the hip measurement, reducing capacity.
  • I did not want to take out much from the side front panel, which would be cut in the elastic webbing.

 

Drafting the Pattern

Initial stages

  • Vertical lines to represent the centre front and centre back
  • Horizontal line to represent the bust
  • Horizontal line 5.5cm down to represent the underbust
  • A horizontal line 14cm down from the overbust line to represent the waistline
  • A horizontal line 10cm from the waist to represent the top hip
  • A horizontal line 20cm line down from the waist to represent the full hip.

 

5.

 

I then drew around the pieces, matching up the waist and overbust lines, lining up the centre front to the vertical line for the front.

6.7.

I drew in a line to represent where the busk would sit at the centre front, and also the small waist dart in the front panel. I reduced the overbust measurement first, taking most out from the centre front/front seam and spreading the remaining amount among the other pieces.

8.

I then reworked the waist, top hip and underbust, taking out the necessary amounts. A lot of the hip adjustments were made at the side back panel. The inner lines would would be my new seam lines. I drew in lines that would form the channels in the centre back piece for the eyelets and bones, making minimal amendments to this piece. I trued the seams (checking that the seam lengths were equal) and amended them where necessary. Finally, I added the seam allowance to my finished pieces (highlighted in pink).

9.1011.12

Toile

I made a simple toile of calico to test the pattern. In place of the pattern’s “elastic webbing” I used a strong powernet, which was likely to be my final fabric choice. It seemed quite a difficult fabric to source in small quantities. For the purpose of the project, powernet would have to do.

I used a very simple construction, including just the busk and the boning either side of the lacing eyelets.

13141516

I checked the fit the corset on me before putting it on the mannequin. I was pleased with the toile, I would only have to make a few adjustments. My measurements are virtually the same as my mannequin, so for ease I marked up some of the style adjustments using fashion tape.

Although the style was low under the arm for ease of movement, I decided to add a little height to the front of the corset to give a little more coverage/modesty for the wearer. The corset did come high to the top hip and the back and the centre back depth was short. I decided to add a little to the height and drop the lower centre back, rounding the hem for a smooth curve. The elastic side panel does look a little distorted with with some with some slight pulling on the seam. This should be corrected once boning is applied in the final corset.

171819

Pattern Amendments

Center Front

  • Raise centre front/front upper seam by 1.5cm, curving to nothing at the center front.
  • Pinch 0.5cm from overbust seam to overbust point.
  • Pinch from waist to low hem by 0.5 cm, as it stands away from body.

Front

  • Raise front seam/centre front seam by 1.5cm.
  • Take out side front/front seam by 0.5cm, blending to 0cm at waist, as side front upper is distorting slightly at the seam.
  • Pinch from waist to low hem 0.5cm to bring it back toward the body.

Side Front (Powernet panel)

  • Reduce side front/front seam by 0.5cm, diminishing to 0cm at waist.

2220

Side Back

  • Raise side back/back seam by 0.5cm
  • Lower side back/back seam
  • Lower hem by 0.5cm

Back

  • Raise back/centre back by 1.5cm
  • Lower back/centre back seam lower hem by 1cm
  • Reshape for smooth curve

21

In the next article, I will use the amended pattern to construct the corset and discuss the seam methods used to piece it together.

 

Bibliography

Doyle, Robert. Waisted Efforts: An Illustrated Guide to Corset Making. Halifax, N.S: Sartorial Press Publications, 1997.

Steele, Valerie. The Corset: A Cultural History. New Haven: Yale University Press, 2001.

 

(1895- 1910) CORSET ADVERTISEMENT: FERRIS BROS. ATHLETIC WAIST & BICYCLE CORSET WAIST

I often refer to old corset advertisements for information on shape or fit of a corset. I am currently writing an article on the ‘Athletic Corset’ so thought I would share some designed by The Ferris Bros Company (established in 1878) for their Athletic and Bicycle corset waist styles.

As physical exercise became more popular amongst woman in the 1890’s, corsets were adapted to allow the wearer freedom of movement and ‘promote healthy respiration’.

bicyle-corset-waist

“THE PERFECT POISE of the woman who wears a Ferris waist is easily distinguishable. She rides with easy grace because every motion, every muscle is absolutely free. She rides without Fatigue because she enjoys perfect respiration. 

FERRIS BICYCLE CORSET WAIST is constructed with elastic sides which yield to every motion of the wearer. The hips are short and pliable, the bust is made to give support without restriction. Every woman who rides a wheel or a horse, who plays tennis or golf should wear a Ferris Waist. They are shown in all their beauty in the Ferris Living Models. Sent Free.”

 

1897-ferris-good-sense-bicycle-waist

1897- FERRIS GOOD SENSE CORSET WAIST FOR BICYCLE WEAR

“FOR BICYCLE WEAR- For the tennis court of gymnasium, every woman should wear a Ferris Waist. Formed on hygienic principles yielding to every motion of the body, permitting full expansion of the lungs, at the same time giving the body healthful and graceful support. Style No. 296 is made with stiff bust, elastic sides and hose support attachment, expressly for bicycle wear and athletic exercise.

FERRIS GOOD SENSE CORSET WAIST is made high and low bust, long and short waist to suit all figures. always superior in quality and workmanship. Children’s 25 cents to 50 cents. Misses’ 50 cents to $1.00. Ladies $1.00 to $2.00. For Sale by all retailers.”

 

ferris-athletic-corset-waist

1902- FERRIS ATHLETIC  CORSET WAIST

“FERRIS ATHLETIC CORSET WAIST is especially designed for women who enjoy outdoor sports. Faultless in outline, it meets every requirement of fashionable dress and yet there is neither restraint nor pressure. Elastic bands at the sides yield to every breath and movement: Comfortable shoulder straps support the bust in any position and keep the shoulders from drooping.

FERRIS ATHLETIC WAIST is the most healthful, restful, graceful, garment a woman ever wore.”

 

813b7e3ea93c4ed559ccd3f96d7b5de3

1908- FERRIS ATHLETIC WAIST- ADVERT PUBLISHED IN GOOD HOUSEKEEPING

STYLE 262

“ACTIVE WOMEN- Body-activity requires limb-freedom, breathing room and growing room. Hence the FERRIS ATHLETIC WAIST is a perfect garment for active women. Without binding or constricting it gently yet firmly supports and molds the body, permitting exercise and unusual freedom of movement”

 

1903-good-sense-athletic-waist-ferris

1903- FERRIS GOOD SENSE ATHLETIC WAIST

STYLE 261

“THE OUTLINE OF HEALTH- There is an old fashioned notion that an athletic waist is ugly. this perhaps is the reason so many woman still embrace the torture of health destroying corsets. they do not know the principles  of the FERRIS GOOD SENSE ATHLETIC WAIST

The above illustration is a photographic reproduction. note the lines of beauty. see the elastic expansion on the side that allows the waist to breathe when you do, that permits you to turn and bend and swing with perfect ease an grace”

 

ferris-corset-good-sense-athletic-waist-1901

1901- FERRIS CORSET GOOD SENSE  ATHLETIC WAIST 

EXERCISE FOR WOMEN often does more harm than good because of a rigid corset. Ferris good sense athletic waist is especially designed for women who enjoy healthful excercise. Faultless in outline it meets every demand of health and comfort, every demand of fashionable dress.

is joined at the waist with elastic bands which yield to every breathe and movement. shoulder straps keep the figure erect and promote healthful respiration.
An indispensable garment for the woman who rides a wheel, plays golf or tennis, rows a boat or climbs a mountain

http://www.ebay.com/itm/AKH-410-Antique-Print-1901-Ferris-Good-Sense-Athletic-Waist-Advertisement-/351898323221?hash=item51eec64915:g:1UwAAOSwMVdYHp9m

 

<a href=”http://www.bloglovin.com/blog/14331383/?claim=qjpg88ctuex”>Follow my blog with Bloglovin</a>