edwardian corset

C1905 BACK SUPPORTING BODICE: SYMINGTON CORSET COLLECTION RESOURCES CENTRE (BARROW-ON-SOAR, UK)

Museum Reference

C210

Summary

Dated: 1905

Back supporting bodice designed to alleviate upper back pain and shoulder stooping. There are 48 flat steels for support from the side and around the back. The bodice would have been worn over a camisole or bust bodice. The eyeletted straps extending from the back and over the shoulder cross over and wrap around the front attaching to the heavy duty brass hooks down the front edge. To see how it would be worn follow the link.

Construction notes

The back supporting bodice is cut as one panel of cotton with darts used to create bust shape. The garment is strengthened with bone casings containing groups of four 6mm flat bones. The bodice is bagged out and finished with a double row of topstitching.

The centre back of the garment features 9 sets of eyelets spaced 2cm apart with flat boning used on either side for support.

Dimensions

Centre front depth 37.5

Centre back depth 20cm

1905 symington back supporting bodice

Back view showing bone positioning. Hooks on front for straps to attach to.

Back Camera

Eyeletted straps from built up high back

 

Back view sketch with garment dimensions

 

 

Front view sketch with garment dimensions

 

Advertisements

1913 STRAIGHT FRONT CORSET: SYMINGTON CORSET COLLECTION: COLLECTION RESOURCES CENTRE (BARROW-ON-SOAR, UK)

Museum Reference

D1

Summary

Dated: 1913

This corset is constructed in two parts made from white open weave cotton and printed with blue mock chain stitch circles. The cotton net was lightweight and breathable allowing air to pass through the holes and kept the skin cool when worn making the corset suitable for summer wear.

This long line style corset is cut under the bust line and finishes over  the thigh with a  dipped hem at the back to sit over the buttocks. The actual waist line was lifted higher than the natural waist so that extreme restriction could not be achieved. Corsets from 1910 featured a straight front but their function was not to compress the waist. The S- bend corset was cut low freeing and no longer supporting the breast. It pushed the stomach and pelvis in, hips and buttocks back and the shoulder and bosom forward creating the pouter-pigeon mono-bosom that was popular with Edwardian fashion.

The corset fastens at the front with a 10″ flat narrow split busk that does not run the full length of the garment. The bottom is left open at the front. The corset is firmly boned with flat steel double bones encased in channels at each seam. Even though the cut of the corset is long the bones only finish part way down the channels to allow some ease of movement to the lower half of the body though still providing support and control. The corset features 4 x plain adjustable suspender.

Trimming is minimal on corsets of this period, most only having lace around the top edge. This corset is finished with a layer cut from the cotton net applied to the upper edge and is  bound at the lower edge with twill tape.

Dimensions

Waist circumference: 24″

Side Depth: 18″